Siemens SINUMERIK 840DE User Manual page 4

®
SINUMERIK documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A . . . . . New documentation.
B . . . . . Unrevised reprint with new Order No.
C . . . . . Revised edition with new status.
Edition Order No.
06.94 6FC5297-0AC10-0BP0
08.94 6FC5297-0AC10-0BP1
02.95 6FC5297-2AC10-0BP0
04.95 6FC5297-2AC10-0BP1
09.95 6FC5297-3AA01-0BP0
03.96 6FC5297-3AC10-0BP0
08.97 6FC5297-4AC10-0BP0
12.97 6FC5297-4AC10-0BP1
12.98 6FC5297-5AC10-0BP0
08.99 6FC5297-5AC10-0BP1
04.00 6FC5297-5AC10-0BP2
10.00 6FC5297-6AC10-0BP0
09.01 6FC5297-6AC10-0BP1
11.02 6FC5297-6AC10-0BP2
11.03 6FC5297-6AC10-0BP3
12.04 6FC5297-7AC10-0BP0
03.06 6FC5297-7AC10-0BP1
Trademarks
All product names mentioned may be trademarks or product designations of Siemens AG or their suppliers,
whose use by third parties for their own purposes may infringe the rights of the trademark owners.
Further information is available in the Internet under:
http://www.siemens.com/motioncontrol
This publication was produced with Interleaf V 7.
©
Copyright Siemens AG, 2006.
Order No. 6FC5297-7AC10-0BP1
Printed in Germany
Remarks
A
C
C
C
Description of differences
C
C
C
C
C
C
C
C
C
C
C
C
Other functions not described in this documentation might be
executable in the control. However, no claim can be made regarding
the availability of these functions when the equipment is first supplied
or in the event of servicing.
We have checked that the contents of this document correspond to
the hardware and software described. Nevertheless, differences
might exist and therefore we cannot guarantee that they are
completely identical. However, the information contained in this
document is reviewed regularly and any necessary changes included
in subsequent editions. We welcome suggestions for improvement.
Subject to change without prior notice.
Siemens AG