Siemens SINUMERIK 840DE User Manual page 6

Preface
Asia and Australia time zone
America time zone
Note
Country-specific telephone numbers for technical support are provided under
the following Internet address:
http://www.siemens.com/automation/service&support
Questions about
For questions on the documentation (suggestions, corrections), please send a
the manual fax or e-mail to the following address:
Fax form: See the reply form at the end of the brochure
SINUMERIK
http://www.siemens.com/sinumerik
Internet address
EC Conformity
The EC conformity declarations on EMC are to be found at/can be obtained
Declaration from:
S
S
Safety information
This manual contains information which you should observe in order to ensure
your own personal safety, as well to avoid material damage. Notices which are
relevant to your own personal safety are highlighted by a safety alert symbol;
notices which are relevant only to equipment and property damage have no
safety alert symbol. The warnings appear in decreasing order of risk as given
below.
Danger
!
Indicates that death or serious injury will result if proper precautions are not
taken.
iv
A&D Technical Support
Tel.: +86 1064 719 990
Fax: +86 1064 747 474
Internet: http://www.siemens.com/automation/support-request
E-mail: mailto:adsupport@siemens.com
A&D Technical Support
Tel.: +1 423 262 2522
Fax: +1 423 262 2289
Internet: http://www.siemens.com/automation/support-request
E-mail: mailto:adsupport@siemens.com
Fax: +49 (0) 9131 / 98 - 63315
E-mail: mailto:motioncontrol.docu@siemens.com
In the Internet:
http://www.ad.siemens.com/csinfo
under the product/order no. 15257461
At the relevant branch office of the A&D MC group of Siemens AG.
SINUMERIK 840D Configuring Manual NCU (PHD) – 03.06 Edition
© Siemens AG, 2006. All rights reserved
03.06