I/O Modules - Siemens SINUMERIK 840DE User Manual

I/O Modules

5.1 Single I/O module
Short description
The single I/O module has 64 inputs and 32 short-circuit-proof outputs (iso-
lated). Each output can be loaded with 0.5 A. The coincidence factor is 75%.
Up to three single I/O modules can be connected to the SINUMERIK 840D;
combinations with SIMATIC S7-300 lines are possible.
Connection The single I/O module (connector X3 IN) is connected to the SINUMERIK 840D
to 840D (connector X111). The max. cable length is 10 m. Two cable variants are avail-
able for the connection from one single I/O module to the next:
S
S
6ES7368-3jjj0-0AA0
X111
840D
Ï Ï Ï Ï
6ES7368-3jjj0-0AA0
X3 IN
Ï Ï Ï Ï
6ES7368-3jjj0-0AA0
X3 OUT
6FC5411-0AA80-0AA0, length 150 mm
Ï Ï Ï Ï
Ribbon cable
EFP X404
32 I
Ribbon cable
Ï Ï Ï Ï
X405
32 I
Ribbon cable
Ï Ï Ï Ï
X402
32 O
Fig. 5-1 Overview of connections, single I/O modules on the SINUMERIK 840D
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D Configuring Manual NCU (PHD) – 03.06 Edition
For single mounting: 6ES7368-3jjj0-0AA0
For single-tier configuration with several single I/O modules: 6FC5
411-0AA80-0AA0, length 150 mm
Connecting cable shielded for single-tier configuration only
6FC5411-0AA80-0AA0, length 150 mm
Ï Ï Ï Ï Ï Ï
IN OUT IN OUT
Ï Ï Ï Ï Ï Ï
X3
X3
Ï Ï Ï Ï Ï Ï
Ï Ï Ï Ï Ï Ï
Ï Ï Ï Ï Ï Ï
Ï Ï Ï Ï Ï Ï
Ï Ï Ï Ï Ï Ï
EFP EFP
Ï Ï Ï Ï Ï Ï
Ï Ï Ï
IN OUT
Ï Ï Ï
X3
Ï Ï Ï
Ï Ï Ï
Ï Ï Ï
Ï Ï Ï
Ï Ï Ï
EFP
Ï Ï Ï
SINUMERIK 840D
IM 361 or second single I/O module
Terminal strip converter
Terminal strip converter
Terminal strip converter
5
5-63