Assembly And Set-Up Instructions - Total Gym ELEVATE ENCOMPASS Owner's Manual

ELEVATE ® ENCOMPASS OWNER'S GUIDE
TM

ASSEMBLY AND SET-UP INSTRUCTIONS

BOX CONTENTS
4
• Tower, Rail and Glideboard Assembly
• LAT Bars and Arm Pulley Cable
Assembly
• Folding Platform
REMOVING ENCOMPASS FROM THE BOX
1. Remove the lid of the
Encompass box and set it
aside.
2. Remove all interior boxes
from the top and sides.
Cut the tape on the end of
the box at the base of the
tower. Unfold that end of
the box. NOTE: Do NOT lift
unit out of box.
• Telescoping Squat Stand
• Folding Foot Holder
• Hardware & Information Box
HARDWARE & INFORMATION BOX CONTENTS
• Spanner wrench (1)
• LAT nut hex wrench (1)
• LAT bar disc washers (4)
• Squeeze bottle of loctite (1)
3. Stand the Encompass
upright and roll it to the
location where you want
the tower to stand.
4. Remove the folding
platform and the
telescoping squat
stand parts from
the bottom of the
box. Then untie the
base.
• Quick links (2)
• Strap handles (2)
• Plastic caps (2)
• Assembly, Set-up and Storage DVD