Note (Under TEST mode):
1. Press "Shot" directly, the camera will take picture or video directly.
2. Press "OK" directly, the captured picture or video can be viewed.
3. Viewing picture, press "Up" or "Down".
4. Viewing video, press "Left" to start, again to stop, press "OK" to
return.
5. Press "Left" directly to get the IMEI (in the TEST interface).
3.4 Power on
Slide Power Switch from OFF to Test(for setting) then to ON position,
the camera powers
on.(Please don't slide the power switch from OFF to
ON
directly)
3.4.1
TEST (The first way to set the menu)
8