Fcc Statement; Fcc Radiation Exposure Statement; Key Features - Quectel UC20 Manual

2.2.1. FCC Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:
a) This device may not cause harmful interference.
b) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

2.2.2. FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
your body as well as kept minimum 20cm from radio antenna depending on the Mobile status of this
module usage. This module should NOT be installed and operating simultaneously with other radio.
The manual of the host system, which uses UC20, must include RF exposure warning statement to
advice user should keep minimum 20cm from the radio antenna of UC20 module depending on the
Mobile status.
Note: If a portable device (such as PDA) uses UC20 module, the device needs to do permissive change
and SAR testing.
The following list of antenna is indicating the maximum permissible antenna gain.
Frequency
Part Number
Range (MHz)
UMTS1900:1850~1990
3R007A
UMTS850:824-894

2.3. Key Features

The following table describes the detailed features of UC20 module.
UC20_Hardware_Design
Peak Gain Average Gain
(XZ-V) (XZ-V)
1 dBi typ. 1 dBi typ.
Confidential / Released
UMTS/HSPA Module Series
UC20 Hardware Design
VSWR Impedance
3 max 50Ω
12 / 84