Icom IC-V8 Instruction Manual page 29

11
OTHER FUNCTIONS
D D Tuning step
Selects tuning step from 5, 10, 12.5, 15, 20,
25 , 30 and 50 kHz.
D D Scan pause timer
Selects the scan pause time from SCt.5,
SCt.10, SCt.15 and SCP. 2. When receiving
signals, the scan pauses according to the
scan pause time.
• SCt. 5/10/15 : Scan pauses for 5/10/15 sec.
(default: SCt.15)
• SCP. 2 : Scan pauses until signal dis-
appears. Resumes after 2 sec. from signal disap-
pearing.
D D Function key timer
Selects [A• ] effect timer from F0.At,
FUNC
F1.At, F2.At, F3.At and F .m.
• F0.At : " " disappears immediately after
F
(default) secondary function is operated.
• F1/2/3.At : " " disappears after 1/2/3 sec.
F
from secondary function is oper-
ated.
• F .m : " " appears until [A•
F
D D LCD backlight
Selects LCD backlight lighting condition from
auto, ON and OFF.
• LIG.At : Lights when any keys except
[PTT] is pushed. (default)
• LIG.ON : Lights continuously during the transceiver powered
ON.
• LIG.OF : Never lights.
47
F
TX
MR
F
TX
MR
F
TX
MR
F
TX
MR
F
TX
MR
] is pushed again.
FUNC
F
TX
MR
D D Transmission permission
Turns transmission permission ON and OFF.
This function can be set for each memory and
call channel, independently.
• tX .ON: Transmission is permitted. (default)
• tX .OF : Transmission is inhibited.
D D Pager/Code squelch channel
Programs 3-digit ID code in channel "C0"
and individual or group call code in channel
"C1" to "C6" for the pager and code squelch
functions. See p. 41 for programming details.
*This item appears only when the optional UT-108 is installed and pager
or code squelch function is activated.
11
OTHER FUNCTIONS
F
TX
MR
Optional UT-108 required
F
TX
MR
48