Battery Status Led - Intermec 730 Quick Start Manual

Battery Status LED

Power to run your Model 730 is supplied by a
powerful Li-Ion battery pack designed to give
you approximately 6-10 hours of operation
(depending on application). In addition, your
Model 730 contains backup capabilities to
prevent loss of data when the main battery is
discharged or when switching out battery
packs.
For maximum effectiveness it is important to
leave the main battery installed in your Model
730 even if it is discharged. If the main bat-
tery is removed, it should be replaced within
10 minutes to avoid the possibility of data
loss.
The Battery status LED B turns red,
green, or yellow.
S Steady Green: Battery is more than 95%
charged and unit is on a charger.
S Blinking Red: Battery is low. The speed of
the blinking increases as the battery's power
gets increasingly lower.
S Red: Main battery is low, or if charging,
will remain red until your Model 730
reaches 95% charge status.
S Yellow: Your Model 730 is on a charging
source and there is no battery pack
installed. Can also mean that your Model
730 is out of charging range 32° to 122°F
(0° to 50°C). Once your Model 730 gets
back in range, charging resumes and the
LED changes to red or green.
S Alternating between Red and Yellow: The
battery pack needs to be replaced.
Model 730 Color Quick Start Guide
9