Intermec Technologies Corporation End User License Agreement - Intermec 730 Quick Start Manual

EXPORT RESTRICTIONS. You acknowledge that
SOFTWARE is subject to U.S. export jurisdiction. You
agree to comply with all applicable international and
national laws that apply to the SOFTWARE, including
the U.S. Export Administration Regulations, as well as
end-user, end-use and destination restrictions issued by
U.S. and other governments. For additional information,
see http://www.microsoft.com/exporting/.
PRODUCT SUPPORT. Product support for the SOFT-
WARE is not provided by MS, its parent corporation,
Microsoft Corporation, or their affiliates or subsidiaries.
For product support, please refer to Intermec Technolo-
gies Corporation support number provided in the docu-
mentation for the DEVICE. Should you have any ques-
tions concerning this EULA, or if you desire to contact
Intermec Technologies Corporation for any other reason,
please refer to the address provided in the documentation
for the DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES. EX-
CEPT AS PROHIBITED BY LAW, MS SHALL HAVE
NO LIABILITY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM OR IN CONNECTION WITH
THE USE OR PERFORMANCE OF THE SOFT-
WARE. THIS LIMITATION SHALL APPLY EVEN IF
ANY REMEDY FAILS OF ITS ESSENTIAL PUR-
POSE.
FOR APPLICABLE LIMITED WARRANTIES AND
SPECIAL PROVISIONS PERTAINING TO YOUR
PARTICULAR JURISDICTION, PLEASE REFER TO
YOUR WARRANTY BOOKLET INCLUDED WITH
THIS PACKAGE OR PROVIDED WITH THE
SOFTWARE PRINTED MATERIALS.
Intermec Technologies
Corporation End User License
Agreement
1 This device contains intellectual property, i.e., software pro-
grams that are licensed for the end user customer's use (here-
inafter "End User").
2 This is not a sale of such intellectual property.
26 Model 730 Color Quick Start Guide