Battery Status Led - Intermec 751G Quick Start Manual

Battery Status LED

Power to run your 751G Computer is supplied by a
powerful Li-Ion battery pack designed to give you
approximately 6-10 hours of operation (depending on
application). In addition, your 751G Computer con-
tains backup capabilities to prevent loss of data when
the main battery is discharged or when switching out
battery packs.
For maximum effectiveness it is important to leave the
main battery installed in your 751G Computer even if
it is discharged. If the main battery is removed, it
should be replaced within 10 minutes to avoid the
possibility of data loss. Before removing the battery
ensure the 751G Computer is in sleep mode.
The Battery status LED B turns red, green, or
yellow.
S Steady Green: Battery is more than 95% charged
and unit is on a charger.
S Blinking Red: Battery is low. The speed of the
blinking increases as the battery's power gets in-
creasingly lower.
S Red: Main battery is low, or if charging, will re-
main red until your 751G Computer reaches 95%
charge status.
S Yellow: Your 751G Computer is on a charging
source and there is no battery pack installed. Can
also mean that your 751G Computer is out of
charging range 32° to 122°F (0° to 50°C). Once
your 751G Computer gets back in range, charging
resumes and the LED changes to red or green.
S Alternating between Red and Yellow: The battery
pack needs replacing.
10 751G Alphanumeric Mobile Computer Quick Start Guide