Direct Analogs - GE N60 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES METERING
 DIRECT ANALOGS

MESSAGE
MESSAGE
The values for the 32 direct analog inputs are available for display. The values are displayed with the units programmed in
the to
DIRECT ANALOG 1 UNITS

PATH: ACTUAL VALUES METERING
 IEC 61850
 GOOSE ANALOGS
MESSAGE
MESSAGE
The N60 Network Stability and Synchrophasor Measurement System is provided with optional IEC 61850
communications capability. This feature is specified as a software option at the time of ordering. Refer to
the Ordering section of chapter 2 for additional details. The IEC 61850 protocol features are not available
if CPU type E is ordered.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.

PATH: ACTUAL VALUES METERING
 PMU 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin N60 Network Stability and Synchrophasor Measurement System


DIRECT ANALOGS

ANALOG INPUT
0.000 unit
ANALOG INPUT
0.000 unit
↓
ANALOG INPUT 32:
0.000 unit
settings.
DIRECT ANALOG 32 UNITS

IEC 61850 GOOSE ANALOGS
ANALOG INPUT
0.000
ANALOG INPUT
0.000
↓
ANALOG INPUT 16
0.000

PHASOR MEASUREMENT UNIT
PMU 1 VA:
0.0000 kV, 0.00°
PMU 1 VB:
0.0000 kV, 0.00°
PMU 1 VC:
0.0000 kV, 0.00°
PMU 1 VX:
0.0000 kV, 0.00°
PMU 1 V1:
0.0000 kV, 0.00°
PMU 1 V2:
0.0000 kV, 0.00°
1:
2:
6.3.11 IEC 61580 GOOSE ANALOG VALUES
1
2
6.3.12 PHASOR MEASUREMENT UNIT

PMU 1(4)
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
6.3 METERING
6.3.10 DIRECT ANALOGS
6-21
6