GE N60 Instruction Manual page 25
Network stability and
synchrophasor measurement system
ur series
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (644 pages)
Table of Contents
Advertisement
1 GETTING STARTED
Before using the Quick Connect feature through the Ethernet port, it is necessary to disable any configured proxy settings
in Internet Explorer.
1.
Start the Internet Explorer software.
2.
Select the Tools > Internet Options menu item and click on Connections tab.
3.
Click on the LAN Settings button to open the following window.
4.
Ensure that the "Use a proxy server for your LAN" box is not checked.
If this computer is used to connect to the Internet, re-enable any proxy server settings after the laptop has been discon-
nected from the N60 relay.
1.
Verify that the latest version of the EnerVista UR Setup software is installed (available from the GE enerVista CD or
online from http://www.gedigitalenergy.com/multilin). See the Software Installation section for installation details.
2.
Start the Internet Explorer software.
3.
Select the "UR" device from the EnerVista Launchpad to start EnerVista UR Setup.
4.
Click the Quick Connect button to open the Quick Connect dialog box.
5.
Select the Ethernet interface and enter the IP address assigned to the N60, then click Connect.
6.
The EnerVista UR Setup software will create a site named "Quick Connect" with a corresponding device also named
"Quick Connect" and display them on the upper-left corner of the screen. Expand the sections to view data directly
from the N60 device.
Each time the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct communica-
tions to the N60. This ensures that configuration of the EnerVista UR Setup software matches the N60 model number.
When direct communications with the N60 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the My Network Places icon and select Properties to open the network con-
nections window.
2.
Right-click the Local Area Connection icon and select the Properties item.
3.
Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
GE Multilin
N60 Network Stability and Synchrophasor Measurement System
1.3 ENERVISTA UR SETUP SOFTWARE
1
1-13
Advertisement
Table of Contents
