Iec 61850 Goose Integers - GE N60 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES STATUS
 IEC 61850
 GOOSE UINTEGERS
MESSAGE
MESSAGE
The N60 Network Stability and Synchrophasor Measurement System is provided with optional IEC 61850
communications capability. This feature is specified as a software option at the time of ordering. Refer to
the Ordering section of chapter 2 for additional details. The IEC 61850 protocol features are not available
if CPU type E is ordered.
The IEC 61850 GGIO5 integer input data points are displayed in this menu. The GGIO5 integer data values are received
via IEC 61850 GOOSE messages sent from other devices.

PATH: ACTUAL VALUES STATUS
 DIRECT INTEGER
 INPUTS
MESSAGE
MESSAGE
The direct integer input data points are displayed in this menu. The direct integer data values are received via direct input
and output messages sent from other devices.

PATH: ACTUAL VALUES STATUS
 TELEPROT CH TESTS

MESSAGE
MESSAGE
MESSAGE
MESSAGE
The status information for two channels is shown here.
GE Multilin N60 Network Stability and Synchrophasor Measurement System

IEC 61850 GOOSE UINTEGERS
UINT INPUT 1
0
UINT INPUT 2
0
↓
UINT INPUT 16
0

DIRECT INTEGER INPUTS
UINT INPUT 1
0
UINT INPUT 2
0
↓
UINT INPUT 16
0

TELEPROT CH TESTS
CHANNEL 1
STATUS: n/a
CHANNEL 1 LOST
PACKETS: 1
CHANNEL 2
STATUS: n/a
CHANNEL 2 LOST
PACKETS: 1
VALIDITY OF CHANNEL
CONFIGURATION: FAIL

6.2.15 IEC 61850 GOOSE INTEGERS

6.2.16 DIRECT INTEGER INPUTS
6.2.17 TELEPROTECTION CHANNEL TESTS
Range: n/a, FAIL, OK
Range: 1 to 65535 in steps of 1
Range: n/a, FAIL, OK
Range: 1 to 65535 in steps of 1
Range: n/a, FAIL, OK
6.2 STATUS
6
6-9