Secondary Storage Drive - Lenovo 30BY User Manual

b. To install a new storage drive into the bracket, flex the bracket and align pin
4 on the bracket with the corresponding holes in the storage drive. Do not touch the circuit board
on the bottom of the storage drive.
Figure 79. Installing the storage drive into the bracket
c. Slide the new storage drive into the storage drive bay until it snaps into position.
Figure 80. Installing the primary storage drive
d. Connect the signal cable and the power cable to the new storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 108.

Secondary storage drive

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Note: Your computer comes with a secondary storage drive bay for installing or replacing a secondary 3.5-
inch storage drive or a 2.5-inch storage drive.
To remove or install the secondary storage drive, do the following:
100
P520c User Guide
1 , pin 2 , pin 3 , and pin
5