Table of Contents
Advertisement
a. Flex both sides of the bracket and align pins
new 3.5-inch storage drive.
Notes:
• Ensure that the circuit board faces downward and the connectors face toward the rear of the
bracket.
• Do not touch the circuit board on the storage drive.
Figure 37. Installing the 3.5-inch storage drive into the bracket
b. Slide the bracket with the new 3.5-inch storage drive into the front-access storage enclosure until it
snaps into position.
Figure 38. Installing the 3.5-inch storage drive into the front-access storage enclosure
c. Press the notch to secure the enclosure cover and lock the enclosure cover with the key.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 108.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive, do the following:
1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating
system first. For more information, see the Windows help system.
78
P520c User Guide
1
on the bracket with the corresponding holes in the
Hide quick links:
Advertisement
Table of Contents
