Table of Contents
Advertisement
Secondary storage drive
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
Note: Your computer comes with a secondary storage drive bay for installing or replacing a secondary 3.5-
inch storage drive or a 2.5-inch storage drive.
To remove or install the secondary storage drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 55.
2. Locate the secondary storage drive. See "Computer components" on page 5.
3. To remove the secondary storage drive, do the following:
a. Disconnect the signal cable and the power cable from the storage drive.
b. Pull the handle of the plastic 3.5-inch storage-drive bracket to remove the storage drive from the
storage drive bay.
Figure 87. Removing the secondary storage drive
c. Flex the sides of the bracket to remove the storage drive from the bracket.
4. To install the secondary storage drive, do the following:
a. Pull the handle of the plastic 3.5-inch storage-drive bracket to remove it from the storage drive bay.
100
P520c User Guide
Advertisement
Table of Contents
