Machine Type And Model Label - Lenovo 30BY User Manual

1
Primary flex bay
3
SD card slot
5
Primary storage drive bay
7
M.2 solid-state drive slots (2)
1 2 Flex bays (2)
Depending on your computer model, the following devices might be installed in the flex bays:
• Flex module
Depending on your computer model, the following parts might be preinstalled in the flex module:
– 15-in-1 card reader
– External Serial Advanced Technology Attachment (eSATA) connector
– Four-digit diagnostics display
– Institute of Electrical and Electronics Engineers (IEEE) 1394 connector
– Slim optical drive
– Front Thunderbolt adapter kit
• Front-access storage enclosure
• Multi-drive conversion kit
Depending on your computer model, the following parts might be preinstalled in the multi-drive
conversion kit:
– Storage drive (such as hard disk drive, solid-state drive, or hybrid drive)
– Slim optical drive
• Optical drive
• Slim-optical-drive adapter
3
SD card slot
An SD card is installed in some models.
4 5 Storage drive bays (2)
You can install hard disk drives, solid-state drives, or hybrid drives in the storage drive bays.
6 PCIe card slots (4)
You can install compatible PCIe cards and PCIe solid-state drives in the PCIe card slots.
7
M.2 solid-state drive slots (2)
One or two M.2 solid state drives are installed in some models.

Machine type and model label

The machine type and model label identifies your computer. When you contact Lenovo for help, the machine
type and model information helps support technicians to identify your computer and provide faster service.
The following is a sample of the machine type and model label.
8
P520c User Guide
2
Secondary flex bay (available on some models)
4
Secondary storage drive bay
6
PCIe card slots (4)