Mitsubishi Electric M420i User Manual page 28

The T9 method
A press on the [Menu] key allows you to swap between T9 text entry and the Multitap method.
1
Press the key bearing the required letter once only (the requested character may not be dis-
played first).
2
The active word changes as you enter text. Enter all the word characters up to the end of the word.
3
If the right word is not displayed when all the characters have been entered, press
you get the required word.
4
If the requested word does not correspond to the one displayed, press the [Menu] key to
swap to the Multi-tap mode and enter the correct letters.
5
Use the [Left arrow] or [Right arrow] keys to move the cursor around the text to insert or
delete characters.
Example To write card:
Press the [Menu] key and select
Select SMS.
Select Write new .
Fill in the To field (see "Sending a new SMS message", page 30).
In the Text field, press on the [Menu] key until
[Menu] key, then select Input mode and choose T9.
Press , A appears.
Press , Cc appears.
Press , Car appears.
Press , Case appears.
If the displayed word is not the one you want, press
necessary to view Card.
To insert a text symbol such as :) or :-) or press
to change the symbol to :( or :-( etc.
Inserting special characters, i-mode pictographs or text
You can insert special characters, i-mode icons (pictographs), pre-stored text models,... while
using the edition mode.
Some of the elements listed below are examples and may vary according to the edition context.
To insert special characters:
1 Press on the [Menu] key, then select Insert.
2 Special characters.
Select
Scroll up, down, left or right and press OK to select the required special
character.
or:
1
Press and hold the
2
Scroll up, down, left or right and press OK to select the required special
character.
The ↵ symbol may not be displayed from all edition modes. It allows you to go to the fol-
lowing line.
To insert i-mode pictographs:
1
Press on the [Menu] key.
2 Select Insert.
3 Select i-mode. Scroll up, down, left or right as many times as necessary to reach the
required icon then press
the six available icons pages (scroll down as many times as necessary to reach the following
pages).
This option is only available from the Mail and MMS edition modes.
.
Messages
two or three times. Press
key to display the special characters list
OK
to validate your choice. You can choose those icons from any of
Messages/Text editing
28-
until
is displayed, or press on the
as many times as
as many times as necessary
.