Table of Contents
Advertisement
or:
1
Slide the screen up.
2
From the standby display press the [Camera/Video] side key.
or:
1
Slide the screen up.
2
From the standby display, press the [Menu] key. Select Camera/Video.
3
Capture a
photo.
Select
1. The infrared port automatically closes when the camera application is accessed.
2. Sliding the screen down closes the camera application.
The Camera related icons and shortcuts
Here is the way information related to the Camera application and its state while in use is dis-
played. The screen shot below is a preview example; the Camera related icons described in
the table below are the ones which can be displayed while using the Camera features. The fea-
tures described in this table are further explained in the chapter.
Camera related icons
Lower part:
In settings panels:
When using the Full auto (Mode), Automatic (White balance) or Normal (Sharpness) modes, no symbol is dis-
played.
Camera application activated.
Picture resolution (size): Messaging (160x120 pixels), Wall
paper (176x240 pixels), Small (320x240 pixels), Normal
(640x480 pixels) and Large (1280x960 pixels).
Self timer activated.
Image quality modes: Super fine, Fine, Economic.
Modes: Night, Sport, Scenery, Sensitive, Backlight,
Monochrome, Sepia and Negative.
Brightness activated.
Contrast activated.
White balance: Indoor fluo, Indoor lamp, Outdoor
Sharpness: Sharp, Soft
Zoom (= zoom levels)
Image quality modes: Super fine, Fine, Economic.
Modes: Full auto (standard mode), Night, Sport, Scenery,
Sensitive, Backlight, Monochrome, Sepia and Negative.
Brightness gauge (= to set the brightness level)
Contrast gauge (= to set the contrast level)
White balance: Automatic, Indoor fluo, Indoor lamp, Outdoor
Sharpness: Normal, Sharp, Soft
Zoom (= zoom levels)
Camera
46-
Advertisement
Table of Contents
