Table of Contents
Advertisement
Preparing the phone to send SMS messages
Before sending your first SMS or if you want to register a new profile, the network SMS centre
number (obtainable from your service provider) must be stored:
FIELDS
DESCRIPTION
Name
To enter the profile name.
Message centre
To enter the centre number.
Format
To set the message format: text, voice, fax or paging.
Validity period
Time the message remains at the message centre until
delivered.
1
Press the [Menu] key. Select Messages.
2
Select SMS.
3
Select Settings.
4
Sending
profile.
Select
5
Enter the message centre number or select a template (if several available) then enter the
following fields (operator dependent).
You may not be allowed to change your sending profile (format and validity period). Please contact your ser-
vice provider for further details.
6
Save
Select
to validate.
The SMS centre number may already be available in your SIM card and may be automatically
displayed. If you want to select a Sending profile for your message:
1
Press the [Menu] key. Select Messages.
2
Select SMS.
3
Select Settings.
4
Sending profile
Select
5
Select Select.
Entering text / Edition mode
All the settings described in this part are to be done from an edition screen.
Some features and functions (storing names in the Phone book, typing SMS text
messages, writing a mail, Tools, Settings,...) require you to know how to enter
and edit text in the display, to insert special characters or mail icons, to copy and
paste text, etc.
Four edition modes are available. They are indicated on the left-hand side of the
screen by
in lower case mode, by
acter toggle mode (the first typed character is an upper case then the others are
lower cases) and by
ters can then be entered or edited directly from the keypad.
To switch from one mode to another:
1
Press on the [Menu] key
2
Lowercase
Select
if the current mode is upper case mode or select
mode is lower case.
When in lower case, on T9 mode or on Multi-tap mode, the Next character toggle mode is automatically set
when required, according to the context (i.e. after a full stop or after ? or ! followed by a space for instance).
There are three input modes to enter text or figures: the Multi-tap (or Multipress) key method,
the quicker intuitive method, called T9 text input and the Numeric mode (to type numbers).
To select an edition mode:
1
Press the [Menu] key to swap modes (T9 to Multi-tap/Multi-tap to T9).
or:
1
Press on the [Menu] key
2
Edition
mode.
Select
3
Select T9,
Multi-tap
or Numeric.
and select the profile you want to use. Press on the [Menu] key.
in upper case mode, by
in numeric mode. Text and figures and alphabet charac-
Messages/Text editing
26-
DEFAULT
Profile1
Empty
Text
Maximum
in next char-
Uppercase
if the current
Advertisement
Table of Contents
