Camera; Mobile Positioning; To Access The Camera Application - Mitsubishi Electric M420i User Manual

Table of Contents

Advertisement

CAMERA

T
he camera application allows you to take pictures with your mobile.
These pictures can then be used to:
- personalise your standby display, your Welcome or your Goodbye screen
(please see "Setting a still or animated image as an Idle screen as a Welcome
screen or as a Goodbye screen from the Pictures folder", page 60),
- be sent to other devices (mobile phones, PC) by Mail (see "Settings", page
72), MMS (see "Quick access to i-mode basic features", page 79) or via the in-
frared port (see "Infrared port", page 23),
- personalise your phone cards (see "Phone names card", page 37).
You can choose from 5 picture size types: Large (1280x960 pixels), Normal (640x480 pixels),
Small (320x240 pixels), Wall paper (176x240 pixels) or Messaging (160x120 pixels).
The Mitsubishi M420i includes a 615 000 pixel CCD pick-up device that enables 1.23-megapix-
el images to be obtained through interpolation.
The use of the camera and the sending, forwarding and reproduction of the pictures taken are
subject to property and privacy rights. Do not take a picture unless authorised.

Mobile positioning

Front:
Subject
behind the
mobile.
1. Please check that the position of the subject on the screen or on the mirror is correct.
2. You can activate the Camera application directly by pressing the [Camera/Video] side key from the standby
display.

To access the camera application

You can access the camera application via three ways:
1
Slide the screen up.
2
From the standby display, press the [OK] key.
Back:
Subject facing the mobile and looking in
the mirror (A) before shooting (B).
Camera
45-

Advertisement

Table of Contents
loading

Table of Contents