RayTek RAYCMLTJM Operating Instructions Manual page 35

Maintenance
Apply any of the above to the lens. Wipe gently with a clean, soft cloth until
you see colors on the lens surface, then allow to air dry. Never wipe the
surface dry - this may scratch the surface. If the lens is contaminated with
silicones (e.g. from hand creams), clean it carefully using Hexane. Allow the
lens to air dry.
Do not use any ammonia or any cleaners containing ammonia to
clean the lens. This may result in permanent damage to the lens'
surface.
35
Rev. B 06/2011
CM