Unlocking The Mtm800E; Locking/Unlocking The Keys/Buttons - Motorola MTM800E Feature User Manual

To activate this feature, press Menu and select More...
> Networks > TXI Mode > Activate.
The TXI Mode remains active at power On. You will be asked
whether to leave the TXI Mode On or not.
Press the Yes key to deactivate the TXI Mode. If the
MTM800E was previously used in Trunked Mode, it will
register to the network. If the MTM800E was previously used
in Direct Mode, it will remain in Direct Mode.
Press No in Trunked Mode and the MTM800E powers down;
press No in DMO and you remain in DMO with TXI selected.

Unlocking the MTM800E

Your MTM800E may be locked at power up.
To unlock the MTM800E after powering on, enter the code at
the prompt. The MTM800E enters the default Home display.
The unlock code is originally set to 0000. Your Service
Provider may change this number before you receive your
terminal.

Locking/Unlocking the Keys/Buttons

Press Menu and
Unlocking the Keypad" on page 115.
The Emergency button is not locked. Pressing the Emergency
button unlocks all keys.
10
Pressing the Emergency button, even if
Transmit Inhibit is activated, causes the
MTM800E to transmit immediately. The
MTM800E must NOT be within the RF
sensitive area when entering Emergency
Operation.
Ensure you have left the RF sensitive area
before deactivating Transmit Inhibit.
. For detailed information, see Locking/