Other Ways Of Dialing - Motorola MTM800E Feature User Manual

Press and hold PTT. Wait for the talk permit tone (if
configured) before talking, and release the PTT when
listening. (This is also called a direct setup.)
The user can make the MS-ISDN Simplex call by pressing the
PTT, when this feature is enabled by the Service Provider.
For a Duplex call, press and release
ringing tone. Wait for the called person to answer your call.
4. To end the call, press
If the called person or the infrastructure end the call, the Call
Ended message is displayed.
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but you cannot answer the call.

Other Ways of Dialing

Dialing via Contact List
You can also use the contact list to select a number you
previously stored. Press Contcs and search the stored
number by scrolling (
characters of the contact name.
If no name is stored under a letter, the MTM800E automatically
searches forward, alphabetically, until the next name is found. If
more than one name in the list begins with the same letter, you
can scroll to view other names or type up to 12 letters.
If the contact has more than one number stored, pickers
surround the contact icon
Short Number Dial
If set up by your Service Provider, Short Dial allows you to
dial part of the full number of the person you wish to call. Your
MTM800E will automatically complete the number and send
it over the air based on your own MTM800E's identity. For
example:
1. Dial 456 (instead of 4282456, the full number).
2. To place the call, press the PTT
60
.
or ) or by entering up to 12
Use / to select the number.
.
or
. You will hear a
.