Writing in iTAP Alphanumeric
For example, let's write "David 232!".
1. In the text entry screen, select Menu > Entry Setup, and
then change to iTAP English. Press Back to return to the
text entry screen.
2. In the text entry screen, select Menu > Entry Mode, and
then select Primary.
3. Press
Continue entering the letters by pressing one key for
3.
each letter. After entering 3 letters, the row shows the
suggested words. Scroll the alternative row to the right until
you reach
4. Press Select to select the word. It is displayed in the main
text area.
Automatic shift to upper case is used at the beginning of a
message, after punctuation followed by space, or for the first
letter of a word created as a new Contact entry.
5. Enter the numbers by pressing one key for each letter. The
row shows the suggested numbers. Scroll the alternative
row to the right until you reach the required combination.
6. To enter the symbol, press
suggested symbol. Scroll the alternative row to the right
until you reach the required symbol. Press Select to select
the numbers. The numbers and symbol are displayed in the
main text area.
. The alternative row opens up and shows
.
David
. The row shows the
D E F
175