Motorola MTM800E Feature User Manual page 81

The terminal exits Emergency Mode and switches to the
Home display:
• If you press and hold the Exit soft key during an
Emergency Group Call
• If the infrastructure ends the Emergency Group Call.
Sending an Emergency Alarm
Your MTM800E will send an Emergency Alarm to the
dispatcher (if configured by your Service Provider):
• Automatically, upon entering Emergency Mode.
• If you press the Emergency button while the MTM800E is
in Emergency Mode.
• If you change group while in Emergency Mode.
The screen will show one of the following delivery reports:
• Alarm Sent
• Alarm Failed
In both cases, the screen returns within a few seconds to the
main screen of the Emergency Mode.
Due to no delivery confirmation in DMO, Alarm Sent
information confirms only sending the alarm.
Or - if configured by your Service Provider - your MTM800E
will send an Emergency Alarm:
• If you press the Emergency button without entering
Emergency Mode before.
> Other Emergency services such as starting TMO
Emergency Mode or initiating Emergency Private Call
will be unavailable.
> No visible and audio indication on sending
Emergency Alarm will be done.
Some systems do not support the Emergency Alarm feature
when the user is in a "Local Area Service" area (see page 31).
.
73