Making a Private PPC (Pre-emptive Priority Call)
This feature is only available if set up by your Service Provider.
1. Enter the private number and press
PTT or
2. If the display shows the called user is
busy, press Yes to interrupt the on-
going call.
3. You will hear a ringing tone. Wait for
the called person to answer your call.
4. Continue the call as in a regular Simplex or Duplex Private
Call.
Call Queuing
When there are no available infrastructure resources for a
call while in a setup phase, or while in an active call during
cell re-selection, the call will be queued. The MTM800E will
remain in queue for a pre-programmed period of time. If the
resources become available, the call will proceed. If there are
no resources after a certain period of time, the MTM800E will
end the call.
64
.
No
David
Busy
Interrupt?
Yes