Motorola MTM800E Feature User Manual page 21

Status
Description
Icon
Data Connected
Displayed when the MTM800E is successfully
connected to an external device and ready for data
transfer.
Data Transmit/Receive
Displayed when the MTM800E is transferring data to/
receiving data from the external device (laptop or
to desktop PC).
No number – standby data session.
Number 1, 2, 3, or 4 – indicates active data session
with 25%, 50%, 75%, or 100% bandwidth.
Direct Mode Operation
Signal Strength (DMO)
Indicates an incoming Direct Mode Group Call.
Direct Mode
Displayed when the MTM800E is in Direct Mode.
DMO Gateway
Indicates that gateway is selected. The icon has three
states:
Solid – while the MTM800E is synchronised with the
gateway.
Flashing – while the MTM800E is not synchronised
or during attachment.
No icon – during a terminal to terminal and repeater
call.
DMO Repeater
Displayed when the repeater option in DMO is
selected. This icon has three states:
Solid – while the terminal has detected the repeater
(i.e., when the terminal receives a presence signal).
Blinking – while the terminal has not detected the
repeater or during attachment.
No icon – during a terminal to terminal and gateway
call.
13