Thermoplan Black&White3 Installation, Initial Start-Up, Safety page 6

Installation refrigerator CTMS
Connection parts set
1
1
To be mounted in
Install part 2 (see set above) at the
back of the machine.
4
Install part 1 of the set under the
drip trays between refrigerator and
machine.
This drawing shows how the
correctly installed connection looks
like when looking from below.
© 2015 by Thermoplan AG, Subject to change
2
3
2
this direction
Use a socket wrench to fix it with
two (2) screws (part 3 of the set).
5
Hold it and insert the four (4)
remaining screws one by one.
Technical Manual
1
1x 117.233 Connection front BW3-RF
2
1x 117.235 Connection rear BW3-RF
3
6x 106.256 Hexagon head cap screw M5x10
ripped
3
2
This drawing shows how the cables are plugged correctly
to connect machine and refrigerator.
REV-5
SECTION 2
3
The part correctly mounted is flush
between the refrigerator and the
machine.
6
When all screws are inserted fix
them with a socket wrench.
1. Power cord
coffee machine
2. Power cord
refrigerator
3. Connection
cable
1
2.6