Specifications - Icom IC-F5121D Service Manual

SECTION 1.
M
GENERAL
• Frequency range
• Number of conventional channels
• Type of emission
• Antenna impedance
• Operating temperature range
• Power supply voltage (negative ground)
• Current drain (approximate)
• Dimensions (projections not included)
• Weight (approximate)
M
TRANSMITTER
• Output power
• Modulation
• Maximum frequency deviation
• Frequency stability
• Spurious emissions
• Adjacent channel power
• Audio frequency response
• FM hum and Noise (without CCITT Filter)
Except [EUR]
• Residual modulation (with CCITT Filter)
[EUR] only
• Limitting charact of modulator
• Audio harmonic distortion
• Input impedance (MIC)

SPECIFICATIONS

: 136–174 MHz
: 128 ch (8 zones)
: [USA], [EXP] Wide
Narrow
Digital
[EUR] Wide
Middle
Narrow
Digital
: 50 Ω (nominal)
: [USA], [EXP] –30˚C to +60˚C; –22˚F to +140˚F
[EUR] –25˚C to +55˚C
: [USA], [EXP] 13.6 V DC (nominal)
[EUR] 13.2 V DC (nominal)
: Receiving 300 mA (stand-by)
1.2 A (max. audio)
Transmitting [25 W ver.] 5.0 A (at 25 W)
[50 W ver.] 10.0 A (at 50 W)
: [25 W ver.] 150 (W)×40 (H)×117.5 (D) mm
5.9 (W)×1.6 (H)×4.6 (D) in
[50 W ver.] 150 (W)×40 (H)×167.5 (D) mm
5.9 (W)×1.6 (H)×6.6 (D) in
: [25 W ver.] 0.8 kg; 1.8 lb.
[50 W ver.] 1.1 kg; 2.4 lb.
: [25 W ver.] 25 W/10 W/2.5 W
[50 W ver.] 50 W/25 W/5 W
: Variable reactance frequency modulation
: Wide ±5.0 kHz
Middle ±4.0 kHz
Narrow ±2.5 kHz
: [USA], [EXP] ±1.0 ppm
[EUR] ±1.5 kHz
: [USA], [EXP] 70 dB typ.
[EUR] 0.25 µW (
1.0 µW (>1GHz)
: Narrow 60 dB min.
Middle 70 dB min. ([EUR] only)
Wide 70 dB min.
: +1 dB to –3 dB of 6 dB/octave (500–2500 Hz)
: Narrow 34 dB min. 40 dB typ.
Wide 40 dB min. 46 dB typ.
: Narrow 40 dB min. 50 dB typ.
Middle 43 dB min. 53 dB typ.
Wide 45 dB min. 55 dB typ.
: 70–100% of max. deviation
: 3% typ. (at 1 kHz AF 40% deviation)
: 600 Ω
1 - 1
16K0F3E (25.0kHz)
11K0F3E (12.5kHz)
8K10F1D/8F10F1E (12.5kHz)
4K00F1D/4F00F1E (6.25kHz)
16K0F3E (25.0kHz)
14K0F3E (20.0kHz)
8K50F3E (12.5kHz)
8K10F1D/8F10F1E (12.5kHz)
4K00F1D/4F00F1E (6.25kHz)
1GHz)