Free The Tone PA-1QG Owner's Manual

Hide thumbs Also See for PA-1QG:

Table of Contents

Enlarged version

PA-1QG·PA-1QB/

P R O G R A M M A B L E

ANALOG 10 BAND EQ

GRAPHIC EQUALIZER

OWNER'S MANUAL

Ver 1.0

Table of Contents

Need help?

Do you have a question about the PA-1QG and is the answer not in the manual?

Page 1 PA-1QG·PA-1QB/ P R O G R A M M A B L E ANALOG 10 BAND EQ GRAPHIC EQUALIZER OWNER’S MANUAL Ver 1.0...
Page 2: Table Of Contents
PA-1QG (for Guitar) Factory Presets ............
Page 3: Controls And Indicators
POWER DC9V IN terminal 1. Press the ON/OFF switch to turn on the LED above it. This switch is used to select PA-1QG/PA-1QB’s Connect the dedicated AC adapter 2. Press the  cursor key switch to select the frequency to be adjusted (blue dot) in the equalizer display.
Page 4: Recalling A Preset
Updating Firmware NOTE Be sure to set the same MIDI program change number on the sending device’s MIDI channel and the PA-1QG/PA-1QB’s MIDI channel. The PA-1QG/PA-1QB can update its firmware. For the latest firmware or connection and setup proce- Setting up MIDI Receiving Channel  P.6 When the PA-1QG/PA-1QB receives a MIDI program change number 001–004, the corresponding LED 1–4 above the PRESET...
Page 5: Midi Specifications
Preset 1: Fat sound with emphasized mid-low frequencies Preset 2: Sound for arpeggio with reduced mid range level The PA-1QG/PA-1QB can switch presets and edit all of the parameters via MIDI signals. The following table shows MIDI signals assigned to various functions.
Page 6: Product Specifications
Be careful of heat radiation from the unit. PA-1QG: 50 Hz, 100 Hz, 200 Hz, 400 Hz, 800 Hz, 1500 Hz, 2500 Hz, 3500 Hz, 7 kHz, 10 kHz (±12 dB) Never cover the AC adapter with cloth or other objects.

Pa-1qb