Subscribe to Our Youtube Channel
Related Manuals for Free The Tone FUTURE FACTORY
Summary of Contents for Free The Tone FUTURE FACTORY
- Page 1 FF-1Y/FUTURE FACTORY RF PHASE MODULATION DELAY OWNER’S MANUAL Ver 1.1...
-
Page 2: Table Of Contents
Thank you for choosing a Free The Tone product. In order to take full advantage of the features and performance it provides, please read this owner’s manual thoroughly, and keep it in a safe place for future reference. Table of Contents Controls and Indicators . -
Page 3: Controls And Indicators
Controls and Indicators Front Panel PAN Switch FUNC Switch MOD Switch OUTPUT Switch Pressing this switch illuminates the DEPTH and SPEED LEDs alternately and the display Pressing this switch illuminates the S.DIV and TRAIL LEDs Pressing this switch illuminates the DEPTH, RATE, and Pressing this switch illuminates the MIX, OUT, and DRY LEDs sequentially and the display contents contents change accordingly. -
Page 4: Rear Panel
Rear Panel Basic Operations and How to Use Each Function EXT Terminal MIDI IN/OUT Switch POWER DC9V IN Terminal By connecting an expression Selects the function of the MIDI For connecting the dedicated AC Storing Changes in a Preset pedal or momentary (unlatch) terminal. -
Page 5: Confirming Previous Value After Parameter Change
Recalling Preset 128 Immediately Confirming Previous Value after Parameter Change 1. Connect a momentary (unlatch) type switch to the EXT terminal. During or after adjusting a parameter, you can confirm its value before storing your change. 2. Press the PRESET switch for about 2 seconds. 1. -
Page 6: Adjusting Delay Tempo (1)
Adjusting Delay Tempo (1) Adjusting Feedback Amount 1. Press the A-DLY-B SEL switch to select the delay (A, B, or A+B) whose feedback amount you want to adjust. With PARAMETER Encoder 2. Press the DLY switch until the FB LED flashes. 1. -
Page 7: Setting Delay Sound's Phase
Setting Delay Sound’s Phase Soft Clipping Function 1. Press the A-DLY-B SEL switch (LED status can be A, B, or A+B). The FF-1Y has a soft clipping (overdrive) circuit and can distort the delay sound. You can use this function to create a 2. -
Page 8: Modulation Function
Modulation Function Useful Features The FF-1Y can apply a modulation effect to the delay sound to make it more spacious. 1. Press the A-DLY-B SEL switch to select the delay (A, B, or A+B) to which you want to apply the modulation effect. Tap-Preferred Mode 2. -
Page 9: Assigning Functions To Preset Select/Tap Switch
Transmitting Data to/from an External Device The FF-1Y can save or recall preset contents to/from a personal computer. For connection and setup procedures, please confirm with the product or support page of the Free The Tone website. Updating Firmware The firmware of the FF-1Y can updated. For the latest firmware or connection and setup procedures, please confirm with the product or support page of the Free The Tone website. -
Page 10: Factory Presets
Factory Presets List of Parameters For each parameter in the FF-1Y’s factory presets, please refer to the product page of the Free The Tone website. Storage in Preset Item Labels on Panel Parameter Range (Displayed as) Initial Value (Stereo) (Series) DELAY TIME D.TIME... -
Page 11: List Of Assignable Functions
◯ ◯ ◯ PRESET ◯ ON/OFF PRESET SELECT/TAP Switch T.h.P hold-PS1 > PS2 > PS3 > PS4 ◯ ◯ TAP Switch FUTURE FACTORY FF-1Y ◯ ◯ A-DLY-B TAP Select T.SL RF PHASE MODULATION DELAY ◯ ◯ PRESET1/2 Switching ◯ ◯... -
Page 12: Safety Precautions
Do not use solvents (such as benzine, paint thinner) Turn off the unit and unplug the AC adapter from the outlet and contact your local dealer or Free The Tone on the unit, since these may dull the finish or damage for repair in the case of any of the following: the surface.
Need help?
Do you have a question about the FUTURE FACTORY and is the answer not in the manual?
Questions and answers