1. Manuals
  2. Brands
  3. Free The Tone Manuals
  4. Recording Equipment
  5. MC-3
  6. Owner's manual

Free The Tone MC-3 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MC-3 and is the answer not in the manual?

Questions and answers

Related Manuals for Free The Tone MC-3

Summary of Contents for Free The Tone MC-3

  • Page 2: Handling Precautions

    SAFETY PRECAUTIONS Thank you for choosing a Free The Tone product. In order to take full advantage of the features and performance it Precautions are identified by the two types of symbols below: provides, please read this owner’s manual thoroughly, and keep it in a safe place for future reference.

  • Page 3: Table Of Contents

    • A unique battery holder that enables one-touch 8. Application Examples battery replacement. 8-1. Turning ARC-3’s LOOP1 On/Off from MC-3’s SW1 8-2. Turning ARC-53M’s MUTE Switch On/Off from MC-3’s SW2 8-3. Performing FLIGHT TIME’s Tap Tempo Entry from MC-3’s SW3 9. Specifications...
  • Page 4 Used to put the MC-3 in Edit mode. Pressing and holding this button for about three seconds SW3/ENTER/STORE switch puts the MC-3 in Edit mode in which you can set In Mode-1, this switch is used to confirm and detailed configurations such as operation mode send the program change number.
  • Page 5 Doing so can damage the cover. POWER switch negative center pin in the output plug (such as Turns on/off the power to the MC-3. Be sure to the Free The Tone “FA-9” AC adapter). turn off this switch to prevent battery depletion if A standard 5.5 x ø2.1 mm plug can be used.

  • Page 6: Character Indications On 7-Segment Led

    BAT TERY POWERED OPERATION In several modes such as Edit mode, the MC-3 uses the following three special characters on the This unit can be driven by a 9-V (006P/6F22) type battery. The actual battery life is as follows though it...

  • Page 7: How To Use

    7-2. How to Configure Presets HOW TO USE The MC-3 provides the following two ways to configure presets: 1) Edit presets in Edit mode (refer to 7-3. Edit mode on p.14) 2) Configure presets directly without entering Edit mode 7-1. Operation Modes Now let’s look at how to configure a preset directly.

  • Page 9: Turning Arc-3'S Loop1 On/Off From Mc-3'S Sw1

    1) In the MIDI setup menu’s Item 1 “MIDI Rx MIDI receive channel setting” on the ARC-3 in Edit mode, By pressing SW2 on the MC-3, the MIDI signal is sent and the MUTE on the ARC-53M is turned on/off.

  • Page 10: Specifications

    SPECIFICATIONS • Terminal: MIDI OUT (5-pin DIN connector) (15.5) (1.6) • Power supply: 9 V battery (006P), AC adapter • Consumption current: max. 25 mA /9 VDC • Dimensions : 120 x 95.7 x 54.1 mm (4.72 x 3.77 x 2.13”) (W x D x H, incl.

Table of Contents