Download
Share
Print this page
Free The Tone TRI AVATAR Owner's Manual
  1. Manuals
  2. Brands
  3. Free The Tone Manuals
  4. Recording Equipment
  5. TRI AVATAR
  6. Owner's manual

Free The Tone TRI AVATAR Owner's Manual

Multi-dimensional chorus
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Owner's Manual
Ver 1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the TRI AVATAR and is the answer not in the manual?

Questions and answers

Related Manuals for Free The Tone TRI AVATAR

Summary of Contents for Free The Tone TRI AVATAR

  • Page 1 Owner’s Manual Ver 1.0...
  • Page 2 • Do not push or press the LEDs on the unit. direct (dry) sounds when the effect is turned on. Manual and Preset modes. mode. • If the unit malfunctions or behaves erratically, cease operation at once and contact your local dealer or Free The Tone directly.
  • Page 3 MIDI device. Recalling a preset (Preset mode) The TRI AVATAR has presets numbered from 1 to 128 and they can be recalled in two ways. Presets 1–4 OUTPUT( L(MONO)-OUT-R) Terminal can be recalled by the operation on the TRI AVATAR alone and presets 1–128 can be recalled via MIDI.
  • Page 4 TRI AVATAR returns to the status in which the original preset is recalled. NOTE Be sure to set the same MIDI program change number on the sending device’s MIDI channel and the TRI AVATAR When the unit is put in Edit mode from Manual mode MIDI channel.
  • Page 5 Changing MIDI reception settings Controlling RATE parameter 1. While holding down the PRESET switch, turn on the power to the TRI AVATAR. Keep the switch pressed 1. Turn the RATE knob clockwise or counterclockwise while holding down the ON/OFF and PRESET until both the PRESET and MANUAL LEDs illuminate.
  • Page 6 MIDI Channel 1     Note that when a preset is recalled on the TRI AVATAR via a MIDI program change number, the TRI AVATAR MIDI Channel 2    ...
  • Page 7 2. Keep the two switches pressed until the PRESET 1–4 LEDs illuminate steadily. Release the switches when the four LEDs are on. 3. All of the presets return to the factory shipment status and the TRI AVATAR is ready for usual operation. NOTE This operation clears all of the presets and resets them to the factory settings.
  • Page 8 Turn off the unit and unplug the AC adapter from the outlet and injury may result. contact your local dealer or Free The Tone for repair in the case of any of the following: Do not use solvents (such as benzine, paint thinner) on the unit, since •...

This manual is also suitable for:

Ta-2h