Installation
Programming
Codes
Controller
Features
Tools Required
–
Straight Screwdriver
1. Turn appliance power OFF.
2. Connect the wire harness to the controller.
3. Attach the 2 provided tinnerman nuts to the controller. Be sure to line up the
holes.
4. Hold the controller against the front panel.
5. Secure the controller to the appliance using the 2 provided screws.
Product Programming 1 7 2 4
System Programming
3 2 2 8
1
LARGE LED DISPLAY: 8-character, 14-segment. Displays programming and
cook cycle information.
2
SERVICE WINDOW: Locate the controller's serial number and tech support
phone number easily.
3
INDICATOR LIGHTS: lit when there's an active cook cycle and in program-
ming mode.
4
PRODUCT KEYS: Press to start a cook cycle. Also used in programming.
REPLACEABLE MENU STRIP: Make menu changes quickly and easily.
5
PROGRAMMING CENTER: Easy cell phone-like programming. Access pro-
gramming mode and change cooking parameters.
6
FEATURE KEYS: Used to access programming functions and controller fea-
tures; keys will vary by model.
7
SCK LINK: Signifies that your control is communications-capable.
3
Need help?
Do you have a question about the Meridian MEC-110 and is the answer not in the manual?