Enter Library Programming; Exit Offset Programming - FASTRON. Meridian MEC-110 Operating Instructions Manual

16
Offset
Programming
CONTINUED
Programming
Custom Product
and Action Alarm
Names to the
Library
SYSTEM 3228
STORE MANAGER
The unauthorized use or duplica-
tion of the software described
herein, or this material, is strictly
prohibited.
229-51339 Rev A
© 2007 FAST
24/7 Tech Support:
1-800-243-9271
Operating Instructions
Use the product keys to enter a
new offset temperature. to
change from negative to posi-
tive, use the left and right
arrow keys. Press the P key.
You have now EXITED System
Programming Mode and can
operate the controller.
ENTER LIBRARY PRO-
GRAMMING MODE.
Press and hold the P key for 3
seconds.
Type in 3 2 2 8 using the prod-
uct keys. Press the P key.
A flashing dash will be dis-
played. Press the SCAN key and
use the product keys to spell a
new word. Press the right
arrow key to advance to the
next character position.
EXIT OFFSET PROGRAM-
MING MODE.
Press the
down arrow key until EXIT
appears.
Press the down arrow key.
Press the down arrow key to
select either PRODLIBR OR
ALRMLIBR.
Continue spelling the word.
When done, press the P key.
Press the P key.
Press the P key.
Choose either PRODLIBR
(Product Library) or ALRMLIBR
(Action Alarm Library) by press-
ing the P key.
TO SAVE WORD
, press P
again. Skip to Exit Library
Programming.
TO CANCEL OR MODIFY
,
see next step.