Subaru BRZ 2018 Owner's Manual page 90

1-6. Security system
■
Deactivating or stopping the alarm
Perform one of the following to deactivate or stop the alarm:
● Unlock the doors using the "keyless access" entry function.
● Unlock the doors using the remote keyless entry system.
● Turn the push-button ignition switch to "ACC" or "ON" mode,
or start the engine. (The alarm will be deactivated or stopped
after a few seconds.)
Activating/deactivating the alarm system
Check that both side doors and the trunk lid are closed.
STEP 1
Turn the push-button ignition switch to "ON" mode.
STEP 2
STEP 3
Alarm status
Deactivated
Activated
88
Open the driver's door while
pressing and holding
the power door lock switch and
continue to press
approximately 10 seconds after
the driver's door has opened.
The
between activated and deacti-
vated as follows.
Horn
Sounds twice
Sounds once
alarm system changes
Multi-information dis-
play
AL oF
AL on
on
for