Subaru BRZ 2018 Owner's Manual page 78

1-4. Opening and closing the windows
■
When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot
be closed, close all the doors perform the following operations using the
power window switch on the relevant door.
STEP 1 Vehicles without a keyless access with push button start system:
After stopping the vehicle, the engine switch is turned to the "ON"
position.
Vehicles with a keyless access with push button start system: After
stopping the vehicle, the push-button ignition switch is turned to
"ON" mode.
STEP 2 Hold the power window switch in the one-touch closing position two
consecutive times.
STEP 3 Hold the power window switch in the one-touch closing position
once again and continue holding for 1 second or more after the win-
dow closes completely.
If you push the power window switch to the opening position while the win-
dow is moving, start again from the beginning. If the window continues to
close but then re-open slightly even after performing the above procedure
correctly, we recommend that you have your SUBARU dealer.
76