Subaru BRZ 2018 Owner's Manual page 326

3-5. Other interior features
■
Programming a New HomeLink Button
Press and release the HomeLink button that you would like to
STEP 1
program. The HomeLink indicator light will flash orange slowly
(if not, refer to "Erasing HomeLink Buttons"
STEP 2
STEP 3
324
Position the hand-held remote
(garage door opener remote) 1
to 3 in. (2 to 8 cm) away from the
HomeLink button that you would
like to program.
Some hand-held remotes (garage
door opener remotes) may actu-
ally train better at a distance of 6
to 12 in. (15 to 20 cm). Keep this
in mind if you have difficulty with
the programming process.
While the HomeLink indicator
light is flashing orange, press
and hold the hand-held remote
button. Continue pressing the
hand-held remote button until the
HomeLink indicator
changes from orange to green.
You may now release the hand-
held remote button.
Some devices may require you to
replace this "Programming a New
HomeLink Button"
procedures noted in the "Gate
Operator / Canadian Program-
ming" section. Refer to "Gate
Operator / Canadian Program-
ming". ( P. 327)
P. 328).
light
with
STEP 3