Subaru BRZ 2018 Owner's Manual page 272

2-4. Using other driving systems
■
Adjusting the angle of the rear wing
STEP 1
STEP 2
STEP 3
STEP 4
270
Front of vehicle
Front of vehicle
Front of vehicle
While holding the bolt on the rear
side with a TORX wrench, using
a wrench, socket wrench and
socket, or similar tool, remove
the nut and washers.
Remove the bolt and washers.
Adjust the angle of the rear wing.
Standard (initial delivery) posi-
tion
High downforce position
We recommend position
attaining both stability at high
speeds and enhanced handling.
Install the bolt and washers.
While holding the bolt with a
TORX wrench, install the wash-
ers and nut and tighten the nut
using a wrench, socket wrench
and socket, or similar tool.
Tightening torque:
2.2 ft•lbf (3 N•m, 0.3 kgf•m)
for