Huawei AR530 Series Configuration Manual page 72

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - Reliability
3.
4.
5.
Issue 01 (2014-11-30)
[RouterD] ospf
[RouterD-ospf-1] area 0
[RouterD-ospf-1-area-0.0.0.0] network 4.1.1.0 0.0.0.255
[RouterD-ospf-1-area-0.0.0.0] quit
After the configuration is complete, run the display ospf routing command on RouterA to
view OSPF routes.
OSPF Process 1 with Router ID
192.168.200.208
Routing
Tables
Routing for
Network
Destination Cost
Area
2.1.1.0/24 1
0.0.0.0
2.2.2.2/32 0
0.0.0.0
3.3.3.3/32 1
0.0.0.0
4.1.1.0/24 3
0.0.0.0
4.4.4.4/32 3
0.0.0.0
5.1.1.0/24 2
0.0.0.0
10.2.1.0/24 53
0.0.0.0
Total Nets:
7
Intra Area: 7 Inter Area: 0
Configure RS-DCC on RouterA.
# Configure a dialer interface.
[RouterA] dialer-rule
[RouterA-dialer-rule] dialer-rule 10 ip permit
[RouterA-dialer-rule] quit
[RouterA] interface dialer 1
[RouterA-Dialer1] dialer user u1
[RouterA-Dialer1] dialer-group 10
[RouterA-Dialer1] dialer bundle 10
[RouterA-Dialer1] ip address 3.1.1.1 255.255.255.0
[RouterA-Dialer1] dialer number 666
[RouterA-Dialer1] quit
# Configure the ATM interface.
[RouterA] interface atm 0/0/0
[RouterA-Atm0/0/0] pvc pppoa 2/40
[RouterA-atm-pvc-Atm0/0/0-2/40-pppoa] map ppp dialer 1
[RouterA-atm-pvc-Atm0/0/0-2/40-pppoa] quit
[RouterA-Atm0/0/0] quit
# Configure a static route for the backup link.
[RouterA] ip route-static 0.0.0.0 0.0.0.0 dialer 1
Configure the DSLAM.
See the DSLAM documentation.
Configure the PPPoA server.
Assign IP address 3.1.1.2 to the PPPoA server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Type NextHop
Transit 2.1.1.1
Stub 2.2.2.2
Stub 2.1.1.2
Transit 2.1.1.2
Stub 2.1.1.2
Transit 2.1.1.2
Stub 2.1.1.2
ASE: 0 NSSA: 0
2 Interface Backup Configuration
AdvRouter
192.168.200.208
192.168.200.208
10.1.1.2
10.137.217.165
10.10.10.2
10.1.1.2
10.10.10.2
61