LinMot Drive Configuration over Fieldbus
2 Firmware Parameters
2.1
Overview
NTI AG
Parameterization of LinMot servo drives over fieldbus interfaces / 30.06.2016
The LinMot drive firmware has to be configured through its
parameters in order to meet the needs of the application where the
servo system has to be integrated. Typical examples of firmware
parameters that must be set during the commissioning process are
motor definition parameters, position control parameters, etc.
The easiest way to alter parameters is to use the LinMot-Talk
software tool. The software displays the parameters in a comfortable
tree structure. Most of the parameters are displayed as a scaled
value with the corresponding physical unit.
Figure 1: Firmware parameters listed in a tree structure
Page 5/25