LinMot Drive Configuration over Fieldbus
5.3
Curve Data Block
5.4
Erasing all curves in the RAM of the Drive
NTI AG
Parameterization of LinMot servo drives over fieldbus interfaces / 30.06.2016
The curve data block contains the setpoints (Y-dimension). The size
of the block is: No Of Setpoints * Data Type Size
The setpoints are equally spaced over the x-length. The x-dimension
equidistance is: x-Length / (No Of Setpoints – 1).
All curves in the RAM of the drive can be deleted by the following
command:
-Curve Service: Delete all Curves (RAM)
Page 17/25