Table of Contents
Advertisement
6.32
Teklogix Imagers Settings
The Teklogix Imagers applet is used to create, modify, delete and activate imager settings.
The principle uses of the applet are to decode bar codes and to capture images.
Note: This icon is only when displayed when the HHP 5000 imager is installed in your
Ikôn PDA.
To launch this applet:
•
Tap on Start>Settings>System tab, and then tap on the Teklogix Imagers icon.
Important: Refer to Appendix C: "Teklogix Imagers Applet" for details about this
A PTSI Imager demo applet is also provided to illustrate how the imager works.
applet.
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Chapter 6: Settings
Teklogix Imagers Settings
175
Advertisement
Chapters
Table of Contents
Troubleshooting
