Appendix C: Teklogix Imagers Applet
Selecting A Camera
Note: The top portion of the window displays the bar code decoding camera presets.
The top port of the window displays the bar code decoding camera presets.
C.4.1
Selecting A Camera
If your Ikôn has more than one built-in camera, one camera must be selected for configura-
tion. To select a camera:
•
Tap on the Camera Presets dropdown menu to view the camera options.
•
Choose a camera – either Front Imager, the imager located at the top of the unit, or
Bottom Colour Camera, the camera located at back of the Ikôn.
Important: Currently, only the 'Front Imager' can be used to read bar codes. The
C.4.2
Setting The Active Preset
An active preset has an A to the right; in Figure C.2 on page page C-9, the active preset is
Defaults. To set an active preset:
•
Highlight the preset, and tap on the Activate button.
C.4.3
Viewing A Preset
To view the parameter settings in a preset:
•
Highlight a preset, and tap on the View button.
C-10
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
'Bottom Colour Camera' is limited to taking photos.