Table of Contents
Advertisement
In this example, the Low light near preset was chosen. A screen like the sample below is
displayed.
•
Type the name of the new preset in the dialog box.
•
Tap on OK to save your changes.
The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.
C.3.6
Modifying A Custom Preset
The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Appendix C: Teklogix Imagers Applet
Modifying A Custom Preset
C-7
Advertisement
Chapters
Table of Contents
Troubleshooting
