Security Configuration - Psion Teklogix IKON RUGGED PDA 7505-BTMC75 User Manual

• Advanced IP – The Advanced IP button in the Show Profile and Edit Profile dialog
boxes opens another dialog box that allows you to configure a static IP address as well
as the IP addresses for the primary and secondary DNS and WINS resolvers.

6.44.5.2 Security Configuration

The Security Configuration dialog box is called up through the Tools menu.
Note: Security configuration is not available with CDMA modems.
The Security Configuration dialog box allows you to enable, disable and change the PIN.
You will need the current PIN to make any of these changes. The PIN must be enabled in
order to be changed. (If the PIN is disabled, the New PIN entry field is greyed out.)
Note: Keep in mind that some network operators do not allow the SIM PIN to be dis-
abled. A new PIN must consist of 4 to 8 numeric digits.
The Require PIN on resume checkbox is independent of the aforementioned settings. By de-
fault, this checkbox is unchecked. While the checkbox remains unchecked, any PIN entered
on startup or through the Security Configuration dialog box and submitted successfully to
the modem is stored in memory for as long as the device is not rebooted. This stored PIN is
then used without further user interaction whenever the modem requires a PIN (such as
resume after suspend or modem removal). The stored PIN is also automatically entered in
the Current PIN text box whenever the Security Configuration dialog box is called up.
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Chapter 6: Settings
Tools Menu
231