Table of Contents
Advertisement
Appendix C: Teklogix Imagers Applet
Teklogix Scanners Applet
•
To view all the triggers and the hardware devices that are configured to use them, tap in
the checkbox next to Show all modules.
Adding, Editing And Removing Triggers
For instruction about adding, editing and removing triggers, refer to "Manage Triggers" on
page 159.
C.5
Teklogix Scanners Applet
The bar code symbologies that are to be read by the imager can be enabled using the Tek-
logix Scanners applet. Tapping on Start>Settings>System tab followed by the Teklogix
Scanners icon displays this applet. Refer to "Imager" on page D-37 for a list of
symbologies.
Warning: Changes made to the symbology configuration using the Teklogix Scanner
C-22
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
applet are synchronized only with the My Defaults bar code symbology
preset. For details, refer to "Configuring Symbologies in the Teklogix
Imagers Applet" on page C-17.
Advertisement
Chapters
Table of Contents
Troubleshooting
