1. Manuals
  2. Brands
  3. DeFelsko Manuals
  4. Test Equipment
  5. PosiTector SPG
  6. Quick manual

DeFelsko PosiTector SPG Quick Manual

Surface profile gauge
Hide thumbs Also See for PosiTector SPG:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual, Quick Manual
Surface Profile Gage
Quick Guide v. 1.4

Advertisement

Table of Contents
loading

Related Manuals for DeFelsko PosiTector SPG

Summary of Contents for DeFelsko PosiTector SPG

  • Page 1 Surface Profile Gage Quick Guide v. 1.4...

  • Page 2: Quick Start

    Download the full instruction manual at: www.defelsko.com/manuals Quick Start The PosiTector SPG powers-up when the center navigation button is pressed. To preserve battery life, the Gage powers down after approximately 5 minutes of no activity. All settings are retained. 1. Remove the protective rubber cap from probe.

  • Page 3: Verification Of Accuracy

    It is not necessary to power- down the Gage when switching probes. PosiTector SPG probes include a 60˚ (ASTM D 4417 B) or 30˚ (Australian Standard AS 3894.5) angle tip (50 µm/2 mil radius) with a measurement range of 0 to 500 µm (20 mils).
  • Page 4 2.6 and 3.4 mils. Zero Menu Zero The PosiTector SPG has only one adjustment point at zero. The zero point can be set using one of two methods. Both methods are found under the Zero menu option. Glass Plate Zero...

  • Page 5: Setup Menu

    Setup Menu Units Converts the display from mils to microns and vice versa. Reset Reset (menu reset) restores factory settings and returns the Gage to a known condition. The following occurs: - All batches, stored measurements, batch names and screen captures are erased.

  • Page 6: Memory Management

    (see PosiSoft USB Drive, pg. 6). SmartBatch™ This menu option sets up the PosiTector SPG to comply with various standards and test methods published by organizations including ASTM, SSPC, ISO, IMO, US Navy, SANS and AS.

  • Page 7: Accessing Stored Measurement Data

    Accessing Stored Measurement Data DeFelsko offers the following free solutions for viewing, analyzing and reporting data: PosiSoft USB Drive - Connect the Gage to a PC/Mac using the supplied USB cable. View and print readings and graphs using universal PC/Mac web browsers or file explorers. No software or internet connection required.

  • Page 8: Connect Menu

    (Advanced models only) Allows individual readings to be sent to a computer, printer or compatible device as they are taken using Bluetooth wireless technology. See www.defelsko.com/bluetooth Sync .net Now The above WiFi, USB and Bluetooth menus contain a Sync .net Now option.
  • Page 9 PosiTector App. Updates Determine if a software update is available for your Gage. See www.defelsko.com/update WARNING: The Gage will perform a Hard Reset (pg. 4) after an update. All stored measurements will be erased from memory.

  • Page 10: Returning For Service

    DeFelsko, PosiSoft and PosiTector are trademarks of DeFelsko Corporation registered in the U.S. and in other countries. Other brand or product names are trademarks or registered trademarks of their respective holders. Every effort has been made to ensure that the information in this manual is accurate. DeFelsko is not responsible for printing or clerical errors.
  • Page 11 Corporation registered in the U.S. and in other countries. Other brand or product names are trademarks or registered trademarks of their respective holders. Every effort has been made to ensure that the information in this manual is accurate. DeFelsko is not responsible for printing or clerical errors.

Table of Contents