Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DeFelsko PosiTector SPG3-E
Summary of Contents for DeFelsko PosiTector SPG3-E
- Page 1 Surface Profile Gage Quick Guide v. 1.4...
-
Page 2: Quick Start
This Quick Guide summarizes the basic functions of the Gage. Download the full instruction manual at: www.defelsko.com/manuals Quick Start The PosiTector SPG powers-up when the center navigation button is pressed. To preserve battery life, the Gage powers down after approximately 5 minutes of no activity. -
Page 3: Verification Of Accuracy
See www.defelsko.com/probes Calibration Instrument calibration is typically performed by the manufacturer. All probes include a Certificate of Calibration. - Page 4 between the shim’s “legs”. The average of several measurements should be within the combined tolerances of both the Gage and the shim. If not, see Returning for Service (pg. 9). Metric example: gage tolerance is ±5 or ±5 µm whichever is greater. The 76 µm shim tolerance is ±5 µm.
-
Page 5: Setup Menu
Setup Menu Units Converts the display from mils to microns and vice versa. Reset Reset (menu reset) restores factory settings and returns the Gage to a known condition. The following occurs: - All batches, stored measurements, batch names and screen captures are erased. -
Page 6: Memory Management
This menu option sets up the PosiTector SPG to comply with various standards and test methods published by organizations including ASTM, SSPC, ISO, IMO, US Navy, SANS and AS. For instructions on how to use the Smart Batch™ feature, see www.defelsko.com/smartbatch... -
Page 7: Accessing Stored Measurement Data
Accessing Stored Measurement Data DeFelsko offers the following free solutions for viewing, analyzing and reporting data: PosiSoft USB Drive - Connect the Gage to a PC/Mac using the supplied USB cable. View and print readings and graphs using universal PC/Mac web browsers or file explorers. No software or internet connection required. -
Page 8: Connect Menu
(Advanced models only) Allows individual readings to be sent to a computer, printer or compatible device as they are taken using Bluetooth wireless technology. See www.defelsko.com/bluetooth Sync .net Now The above WiFi, USB and Bluetooth menus contain a Sync .net Now option. - Page 9 PosiTector App. Updates Determine if a software update is available for your Gage. See www.defelsko.com/update WARNING: The Gage will perform a Hard Reset (pg. 4) after an update. All stored measurements will be erased from memory.
-
Page 10: Returning For Service
DeFelsko, PosiSoft and PosiTector are trademarks of DeFelsko Corporation registered in the U.S. and in other countries. Other brand or product names are trademarks or registered trademarks of their respective holders. Every effort has been made to ensure that the information in this manual is accurate. DeFelsko is not responsible for printing or clerical errors. - Page 11 Corporation registered in the U.S. and in other countries. Other brand or product names are trademarks or registered trademarks of their respective holders. Every effort has been made to ensure that the information in this manual is accurate. DeFelsko is not responsible for printing or clerical errors.
Need help?
Do you have a question about the PosiTector SPG3-E and is the answer not in the manual?
Questions and answers